DSS-1000 User Manual
83
Click to display 6
channels at a time on a 2+4
layout.
Click to display 10
channels at a time on a 2+8
layout.
To view succeeding channels, use the icon. For example, if viewing on a 2-channel
layout, and you want to view the next 2 channels, click . Or, click on the number and select
the page to view.
Patrolling Channels
Instead of viewing all 9 channels at the same time, users may want to view one channel in full
screen or two channels at a time and scroll through all the channels alternately. To do this,
follow the procedures below:
1. Select the desired window layout for patrolling (i.e. Layout 1 for full screen or Layout 2 for
two channels at a time, etc.).
2. Click to enter Patrol Time Setting window to set the patrol interval and click “OK” to
start Sequence Patrol. By default, 3 seconds is the interval between changing one screen
to another. If necessary, type a different number to modify the interval time.
3. Sequence Patrol starts. To stop the patrol, click again.
To Next Page
Loading...
