http://www.level1.com Page 173
management page, and then click the “Restore” bLeveloneon in the column of “Restore factory
settings” to manually restart the device, to restore the device to its factory settings.
Case II: Forget the administrator password
If you forget the administrator password, you will not be able to enter the WEB interface, and now
you can only use the Reset bLeveloneon to restore the factory settings of the device. The steps are
as follows: In the process of the device's charged operation, hold down the Reset bLeveloneon for
more than 5 seconds, and then release the bLeveloneon, the device will be restored to its factory
settings, and automatically restarted.
To Next Page
Loading...
