Chapter 7 Advanced Configuration
http://www.level1.com Page 51
Static route is manually configured by a network administrator, making the transmission of
packets to the specified destination network be realized according to the predetermined path.
Static routing does not change with changes in the structure of the network, therefore, when
network structure changes or there is a network failure, you need to manually modify the static
routing information in the routing table. Setting and using static routes correctly can improve
network performance and meet special requirements, such as implementing traffic control,
guaranteeing bandwidth for important applications and so on.
The following describes the list of routing configuration information and the meaning of the
parameters in the routing configuration.
Figure 7_10 Static Route List
Click <Add new entry> in the above figure, and enter the Route configuration page.
Figure 7_11 Static Route Settings
To Next Page
Loading...
