Diagnostic aids 3-23
5025-2xx, 4xx
The printed event log can be faxed to your next level of support for verification or diagnosis.
To print the event log:
1. Select Event Log from Diag Menu, and press Select ().
2. Select Print Log, and press Select ().
Press Back ( ) to return to Event Log.
Clear Log
Use Clear Log to remove the current information in the Event Log. This affects both the viewed log and the
printed log information.
1. Select Event Log from Diag Menu, and press Select ().
2. Select Clear Log, and press Select ().
3. Select YES to clear the Event Log or NO to exit the Clear Log menu. If YES is selected, Deleting EVENT
LOG displays on the screen.
Press Back (
) to return to Event Log.
EXIT Diags
Press Select ( ) to exit Diag Menu. The printer performs a power-on reset and returns to normal mode.
To Next Page
Loading...
Need help?
General
