Lexmark MS310

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Other Special Instructions
Staple Finisher
The Staple Finisher is new to the Mid-Range Monochrome Laser product family. It is only available for the
MX610 Series. The removal and installation procedure is really easy. Follow the instructions below on
how to properly uninstall the Staple Finisher.
1. Turn off the machine, unplug it from its power source, and then disconnect the staple finisher
power cable from the printer.
2. Press the latches to release, then pull the staple finisher off the printer
For Training Purposes Only 90 4/21/2014