EasyManua.ls Logo

Lexmark MS310

Lexmark MS310
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Cleaning the MFP Document Glass
It is important to clean the MFP on a regular basis to keep it functioning properly (about once a month
depending on usage). You should also clean the scanner glass if you encounter print quality problems
such as streaks on copied or scanned images.
Note: Clean both areas of the scanner glass and both white underside areas.
Warning! Always turn the printer OFF and unplug it before cleaning.
Slightly dampen a soft, lint-free cloth or paper towel with water. Do not use any kind of cleaning
agent to clean the glass.
Do not spray liquid on the glass.
Wipe the scanner glass until it is clean and dry.
Wipe the white underside of the scanner cover until it is clean and dry.
White Underside
ADF Cover
Scanner
Glass
ADF Glass
White Underside
Scanner Glass
Cover
For Training Purposes Only 92 4/21/2014

Table of Contents

Other manuals for Lexmark MS310

Related product manuals