Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
11. If the Web page cannot be accessed, or an error persists despite trying to boot in Invalid
Engine code mode, then there is no way to backup the eSF apps. Make the customer aware
of this.
12. Don’t Use the “Global” Import/Export method to back up the eSF applications and settings.
There is a size limit of 128kb on the export file.
13. Customers with a large number of applications or settings may exceed the file size limit and
have information truncated in the exported file.
14. Once the new Controller Board is installed, follow the same steps as above, however, you will
Import (instead of export) the <filename>.UCF file for each application.
For Training Purposes Only 76 4/21/2014
To Next Page
Loading...
