Diagnostic information 2-87
4060-xxx
Close Finished Side Door displayed—unable to clear or reset message. (POST
incomplete)
POST incomplete—stapler cycles several times.
FRU Action
1 Side cover door Check the stapler access door for any signs of damage or broken
parts. Make sure the door correctly actuates the stapler side access
door switch.
2
Side cover door switch
Stapler card assembly
Check the continuity of the stapler access door switch. If incorrect,
replace the stapler access door switch assembly. If correct, replace
the stapler card assembly.
FRU Action
1 Stapler assembly Replace the stapler assembly.
Note: When replacing the stapler assembly, observe the location of
the ground lead from the stapler assembly and the finisher frame.
Make sure the ground lead is correctly reattached.
To Next Page
Loading...
