Preventive maintenance 6-1
4060-xxx
6. Preventive maintenance
This chapter describes procedures for printer preventive maintenance. Following these
recommendations can help prevent problems and maintain optimum performance.
Safety inspection guide
The purpose of this inspection guide is to aid you in identifying unsafe conditions.
If any unsafe conditions exist, find out how serious the hazard could be and if you can continue
before you correct the hazard.
Check the following items:
• Damaged, missing, or altered parts, especially in the area of the on/off switch and the power
supply.
• Damaged, missing, or altered covers, especially in the area of the top cover and the power
supply cover.
• Possible safety exposure from any non-Lexmark attachments.
Lubrication specifications
No requirements for this printer.
Scheduled maintenance
The operator panel displays the message “80 Scheduled Maintenance” at each 300K page count
interval. It is necessary to replace the fuser assembly, transfer roller, charge roll, and pick tires at this
interval to maintain the print quality and reliability of the printer. The parts are available as a
maintenance kit with the following part numbers:
After replacing the kit, the maintenance count must be reset to zero to clear the “80 Scheduled
Maintenance” message. See “Maintenance page count” on page 3-17.
Maintenance kits
Description
Part number
000/010, 200/210 400/410
115 V Maintenance kit 56P1409 56P1855
220 V Maintenance kit 56P1412 56P1856
100 V Maintenance kit 56P1413 56P1857
To Next Page
Loading...
