1-12 Service Manual
4060-xxx
Print area
The printable area is limited to within 4.2 mm (0.167 in.) of all edges of the media. Any information
placed outside this specified printable area does not print.
Media guidelines
Paper designed for use with xerographic copies should provide satisfactory print quality and feed
reliability. Other types of supplies may be suitable. We recommend that users test any particular
brand for suitability to their applications. Refer to the printer’s user information for additional media
specifications.
Paper
Use the following media guidelines for successful printing:
• Rough, highly textured, limp, or pre-curled paper results in lower print quality and more frequent
paper feed failures.
• Colored paper must be able to withstand 227° C (440° F) fusing temperature.
• Preprinted forms and letterheads should be selected using guidelines found in the printer’s user
information. The chemical process used in preprinting may render some papers unsuitable for
use with this printer.
Integrated forms Pressure sensitive area
2
140 to 175 g/m
2
Paper base (grain long) 75 to 135 g/m
2
(20 to 36 lb bond)
Envelope Sulfite, wood-free or up to 100%
cotton bond
60 to 105 g/m
2
(16 to 28 lb bond)
3, 4
Envelope feeder
Envelope Sulfite, wood-free or up to 100%
cotton bond
60 to 105 g/m
2
(16 to 28 lb bond)
3, 4
2000-sheet drawer
Paper Xerographic or business paper 60 to 135 g/m
2
grain long
(16 to 36 lb bond)
1
Grain short is preferred for paper over 135 g/m
2
.
2
Printing label applications on your printer requires a special label fuser cleaner which prevents duplexing.
3
28 lb bond envelopes are limited to 25% cotton content.
4
Includes envelopes fed from the multipurpose feeder only.
5
Information on whether your vinyl label converter has passed Lexmark’s criteria is available at Lexmark’s
Web site (www.lexmark.com). Search for “converter list.” You can also check Lexmark’s Automated Fax
system (LEXFAX
SM
).
Media weights—input (continued)
Media Type Weight
To Next Page
Loading...
