Lexmark T632 - Outer Shield Removal; Paper Alignment Assembly Removal

4-52 Service Manual
4060-xxx
Outer shield removal
1. Remove the left door. See “Left door removal” on page 4-9.
2. Loosen the outer shield mounting screws (A) and remove the shield.
Paper alignment assembly removal
1. Remove the upper paper deflector assembly. See “Upper paper deflector assembly removal”
on page 4-63.
2. Remove the inner paper deflector assembly. See “Inner paper deflector assembly removal”
on page 4-33.
3. Release the input paper sensor from its mounting and remove.
4. Remove the left door.
A(202)
A(202)