1-6 Service Manual
4060-xxx
Operating clearances
Power and electrical specifications
Average nominal power requirements for the base printer configuration (110 volt). Power levels are
shown in watts.
Note: Using a 220 to 110 power converter with the 110 volt printer is not recommended.
Electrical specifications
Low voltage model
• 100 to 127 V ac at 50 to 60 Hz nominal
• 99 to 137 V ac, extreme
High voltage model
•
220 to 240 V ac at 50 to 60 Hz nominal (not available in all countries)
• 190 to 259 V ac, extreme
Printer side Measurement
Left and right side 12 in. (304.8 mm)
Front 20 in. (508 mm)
Rear 12 in. (304.8 mm)
Top* 54 in. (1,371.6 mm)
* Allow clearance above the printer front door clearance and for adding
options, such as additional input drawers, output expander, high-capacity
output stacker, or StapleSmart finisher.
Printing states
Lexmark
T630
Lexmark
T630n
Lexmark
T632
Lexmark
T632n
Lexmark
T634
Lexmark
T634n
Printing—average power
Base model 429 W 432 W 523 W 527 W 584 W 590 W
All options
457 W 460 W 540 W 544 W 608 W 614 W
Idle—average power
Power Saver on 12 W 15 W 14 W 14 W 15 W 16 W
Power Saver off 81 W 84 W 81 W 84 W 86 W 87 W
Printing—maximum current
110V 8.8 A 8.8 A 9.8 A 9.8 A 10.2 A 10.2 A
230V 4 A 4 A 5 A 5 A 5 A 5 A
To Next Page
Loading...
