Lexmark T632 - Error Message 282 - Check Stapler; Error Message 283 - Check Stapler

3-26 Service Manual
4060-xxx
Error Message 282 - Check Stapler
This message indicates that a staple jam has been detected during normal operation, when printing
and stapling jobs. The printer alternately flashes the primary and secondary message to indicate that
all accumulated sheets should be removed during the jam clearance procedure.
Error Message 283 - Check Stapler
This message indicates that a staple jam has been detected during a stapler priming operation.
There is no secondary message displayed.
Note: After the error has been cleared, the printer does not reprint any pages which existed in the
accumulator for stapling.
Note: Do not use the Sub Error chart to help diagnose problems when 281, 282, and 283 are
displayed.