1-4 Service Manual
4060-xxx
Time to first print
Memory configuration
Depending upon the options and features used, additional memory may be required to optimize
performance.
Available memory options
Optional 8MB, 16MB, 32MB, 64MB, and 128MB SDRAM DIMMs are available from Lexmark. The
memory options are 168-pin synchronous DRAM DIMMs.
Flash memory options include 16MB and 32MB.
Lexmark T630,
Lexmark T630n
Lexmark T632,
Lexmark T632n
Lexmark T634,
Lexmark T634n
Time from standby mode <8.5 sec. <10 sec.
Time from Power Saver mode 42 sec. 42 sec.
All first copy times are measured for 600 dpi simplex printing on letter size paper. The test job consists of the
character “A” followed by a form-feed (single page job). The first copy time is defined as the elapsed time
from pressing Enter on the PC keyboard to the page exiting to the output bin. All tests pick paper from the
indicated tray and the page exits into the primary output bin.
Memory
Lexmark T630,
Lexmark T630n
Lexmark T632,
Lexmark T632n
Lexmark T634,
Lexmark T634n
Standard DRAM 32/64MB 64/64MB 64/80MB
Maximum 288/320MB 320/320MB 320/336MB
To Next Page
Loading...
