2-14 Service Manual
4060-xxx
User status displays
Each user status screen may also display a warning message. See “Warning messages (second
lines)” on page 2-16 for additional information when they display.
User status displays Status Action
The printer is ready to receive and
process data.
Press Menu to take the printer out of
Ready and enter all the menus except
the Tests Menu (Busy State).
The printer displays the fax status. Press Menu to take the printer out of
Ready and enter all the menus except
the Tests Menu (Busy State).
The printer is ready and HEX Trace is
active, which is known as HEX Trace
Ready.
Press Menu to take the printer out of
Ready and enter the Tests Menu (Busy
State). Press Select for the values.
Press Menu until Reset Printer
displays on the second line. Press
Select to reset the printer.
When in the power saver mode the
printer displays this screen instead of
the ready screen. When a job is
received, the power saver screen
remains displayed until the printer exits
the power saver mode and the printer
warms up.
Press Menu to take the printer offline
and access the Ready Menu Group.
or
Press Go to take the printer out of
power saver and initiate a printer warm
up cycle.
or
Press Stop to take the printer offline.
Not Ready is displayed and no more
data is processed. Press Go to return
the printer to the previous state.
When the printer has been configured to
receive or send faxes the printer
displays this screen.
The printer is processing data or
printing pages and the resolution of a
page belonging to the current job has
been reduced from 600 to 300 dpi to
prevent a Memory Full Error.
Press Stop to take the printer offline.
Not Ready is displayed, no more data
is processed, and the current job in the
paper path is processed. Press Go to
return the printer to the previous state.
or
Press Menu to access the Busy/
Waiting Menu. The following functions
may be available:
•Cancel Job
• Reset Printer
• Reset Active Bin
•Cancel FAX
Displayed whenever the printer has
been configured to receive or send
faxes.
Ready
<warning>
Ready <fax status>
<warning>
Ready HEX
<warning>
Power Saver HEX
<warning>
Power Saver <fax status>
<warning>
Res Reduced
<warning>
Res Reduced <fax status>
<warning>
To Next Page
Loading...
