2-62 Service Manual
4062
260.01 Envelope feeder
assembly error
Mechanical feed error or timing
error.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check media for proper
installation.
4. Check for obstructions in
media path.
5. Ensure the envelope feeder
assembly is properly
installed.
6. Check all connections on
the envelope feeder
assembly.
7. Replace the envelope
feeder assembly if problem
remains.
260.02 Envelope feeder
assembly error
Mechanical feed error or timing
error.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check media for proper
installation.
4. Check for obstructions in
media path.
5. Ensure the envelope feeder
assembly is properly
installed.
6. Check all connections on
the envelope feeder
assembly.
7. Replace the envelope
feeder assembly if problem
remains.
260.05 Sensor (envelope
feeder pass through)
lingering jam
Source = Envelope
feeder
The media reached the sensor
(envelope feeder pass through)
but did not clear it in the
specified time.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check for obstructions in
media path.
4. Ensure the envelope feeder
assembly is properly
installed.
5. Check all connections on
the envelope feeder
assembly.
6. Replace the envelope
feeder assembly if problem
remains.
Error
code or
message
Error contents Description/Action Possible repair actions
To Next Page
Loading...
