Menu item Description
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specifies whether an original document is duplex (two-sided) or simplex (one-sided),
and then specifies whether the copy should be duplex or simplex
Notes:
• 1 sided to 1 sided—The original document has print on one side and the copy will
also have print on one side.
• 1 sided to 2 sided—The original document has print on one side, while the copy
will have print on both sides.
• 2 sided to 1 sided—The original document has print on both sides, while the copy
will have print on just one side.
• 2 sided to 2 sided—The original document has print on both sides, and the copy
will also have print on both sides.
Paper Saver
Off
2 on 1 Portrait
2 on 1 Landscape
4 on 1 Portrait
4 on 1 Landscape
Allows copying two or four sheets of a document on one page
Note: Off is the factory default setting.
Print Page Borders
Off
On
Specifies whether or not a border is printed
Note: Off is the factory default setting.
Collate
On [1,2,1,2,1,2]
Off [1,1,1,2,2,2]
Keeps the pages of a print job stacked in sequence when printing multiple copies
Note: On is the factory default setting.
Punch
Off
2 holes
3 holes
4 holes
Specifies the type of hole punch finishing to be used in a print or copy job
Note: Off is the factory default setting.
Staple
Off
Auto
Back
Dual
Dual Double
Front
Lets you enable or disable the staple finisher
Notes:
• Off is the factory default setting.
• This menu only appears when a staple finisher is installed.
Understanding printer menus
190
To Next Page
Loading...
