Linertec LTS-200 Series User Manual

Press [ENT] to view the following screen.
The PN, X, Y, Z and PC are viewed and can be edited.
If all items are OK, press [F5] [ACCEPT] to save them.
6.1.3 Circle Radius
The Center point and radius of the circle drawn by three points are calculated by this
function. You can store calculated Center point.
Input: 3 points
Output: Center point of the arc
Radius of the arc
From the LinertecExpress screen, press 4 to view the CALCULATION screen.
65
Center P
Radius
P1
P2
P3

Linertec LTS-200 Series Specifications

General

Brand	Linertec
Model	LTS-200 Series
Category	Measuring Instruments
Language	English