Select 1.COGO and press [ENT] to view the COGO screen.
Select the 3. CIRCLE RADIUS and press [ENT] to
view CIRCLE RADIUS screen.
Select 1. P1 and press [ENT] to view P1 screen.
Input PN (Point Name), X, Y, Z, and PC (Point
Code) of P1 point or import from the memory
of rectangular coordinate as P1 by [F2] [LIST].
If you finish the input of P1 value, press [F5]
[ACCEPT]. Then you go to P2 input screen.
Input P2 data like input of P1.
If you finish the input of P2, press [F5] [ACCEPT].
Then you go to P3 input screen.
If you finish the input of P3, press [F5] [ACCEPT].
Then you go to RESULT OF CIRCLE RADIUS
screen.
You can see the coordinates of Center point of the
arc and the radius of the arc.
Press [F5] [ENT] to save the coordinates of center
point.
The PN, X, Y, Z and PC are viewed and can be edited.
If all items are OK, press [F5] [ACCEPT] to save them.
66
To Next Page
Loading...
