Linertec LTS-200 Series User Manual

Select 1. C1 and press [ENT] to view C1 screen.
C1 (Center 1) point is Center point of Arc 1.
Input PN (Point Name), X, Y, Z, and PC (Point Code) of C1 point or import from the
memory of rectangular coordinate as C1 by [F2] [LIST].
If you finish the input of C1 value, press [F5]
[ACCEPT].Then you go to R1 input screen.
Input the radius of Arc1 as R1 value. If you finish
the input of R1, press [ENT].
Then you go to C2 input screen.
C2 (Center 2) point is Center point of Arc 2. Input PN (Point Name), X, Y, Z, and PC (Point
Code) of C2 point or import from the memory of rectangular coordinate as C2 by [F2]
[LIST].
If you finish the input of C2 value, press [F5] [ACCEPT].Then you go to R2 input screen.
Input the radius of Arc 2 as R2 value. If you finish the
input of R2, press [ENT].
Then you go to RESULT OF ARC-ARC
INTERSECTION screen.
You can see the coordinates of one of intersection point. You can switch to one more
intersection point by pressing [F3] [ONE MORE].
Press [F5] [ENT] to save one of intersection point.
The PN, X, Y, Z and PC are viewed and can be edited.
72

Linertec LTS-200 Series Specifications

General

Brand	Linertec
Model	LTS-200 Series
Category	Measuring Instruments
Language	English