If all items are OK, press [F5] [ACCEPT] to save them.
6.1.7 DISTANCE OFFSET
Offset distance of new point to the line and distance of Start point to new point are
displayed. Also New Point on the line is calculated by point of start, end, and offset.
You can store the New Point.
Input: line: Start Point (SP) and End Point (EP)
Offset Point (OP)
Output: New Point
Offset of New Point from the line
(moving in the direction from Start point to End Point, right is positive,
left is negative)
Distance of New Point from Start point
From the LinertecExpress screen, press 4 to view the
CALCULATION screen.
Select 1. COGO and press [ENT] to view the COGO
screen.
73
(+)
SP
EP
Offset P
New Point
Offset P
(-)
offset
Distance
To Next Page
Loading...
