Link4 iPonic 624 - 3 Main Menu - SYSTEM SETUP

iPonic 624® Manual PN 995-1124-00
35| Page
When you make one of the 3
selections in the above screen,
you can view graphing
information collected by the
sensor modules.
You have four options:
1. Since Reset (the last
time the unit was
powered on or when the
Reset button was
activated)
2. Last Hour
3. Last 24 Hours
4. Last 7 Days.
This example shows a graph of
the Inside Temp reading for the
Last Hour.
3.0 Main Menu — SYSTEM SETUP
System Setup in the Main
Menu enables you to set up the
grow room equipment, the
sensors and the alarms and other
features as listed below: