Recording9
To set options for manual recording:
1. From the Live View display, right-click to open the Quick Menu. Click Manual, then Record.
2. Under Main Stream, select how the system will record the Main Stream for each channel:
• Auto: Main Stream recording will follow the recording schedule.
• Manual: The system will record the Main Stream continuously as long as this option is
checked.
• Off: The system will not record the Main Stream for this channel. This option is not
recommended.
3. Under Sub Stream, select how the system will record the Sub Stream for each channel.
• Auto: Sub Stream recording will follow the recording schedule.
• Manual: The system will record the Sub Stream continuously as long as this option is
checked.
• Off: The system will not record the Sub Stream for this channel. This option is not
recommended.
4. Under Snapshot, select Enable to enable snapshot recording on each channel. Or, select Dis-
able to disable snapshot recording.
NOTE
To set more preferences for snapshots recording, see 16.2.4 Configuring Snapshot Recording Settings, page
62.
5. Click Apply.
#LX400113; r. 1.0/56015/56022; en-US 26
To Next Page
Loading...
Need help?
General