Using the Main Menu16
2. Click , then click NETWORK. Click the Port tab on the side panel.
3. Configure the port numbers as needed.
4. Click Apply to save changes.
NOTE
Up to 3 devices may connect to the system at the same time.
16.4.3 Configuring IP Filter
Configure permissions for external IP addresses attempting to access the unit.
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click
, then click NETWORK. Click the IP FILTER tab on the side panel.
#LX400113; r. 1.0/56015/56022; en-US 76
To Next Page
Loading...
