Using the Main Menu16
2. Click
, then click STORAGE. Click the HDD MANAGER tab on the side panel.
3. Select the hard drive type under the Type column next to the hard drive you would like to
configure.
4. Click Apply to save changes. The system will restart to complete this operation.
16.4.14 Configuring Holidays
You can set certain days as holidays. Holidays have a special recording schedule.
To configure holidays:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click
, then click SYSTEM. Click the GENERAL tab on the side panel, then
click the Holiday tab on the top panel.
#LX400113; r. 1.0/56015/56022; en-US 87
To Next Page
Loading...
