Using the Main Menu16
2. Click
, then click SYSTEM. Click the DISPLAY tab on the side panel, then click
the Display tab on the top panel.
3. Under Resolution, select the correct resolution for your monitor.
4. Click Apply to save changes. Click OK again to restart the system using the new resolution.
To configure other display settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click
, then click SYSTEM. Click the DISPLAY tab on the side panel, then click
the Display tab on the top panel.
#LX400113; r. 1.0/56015/56022; en-US 90
To Next Page
Loading...
Need help?
General