LulzBot TAZ User Manual

3.2. GETTING SLIC3R
Downloading
Slic3r can be downloaded directly from: http://slic3r.org/download.
Pre-compiled packages are available for GNU/Linux, Mac OS X and
Windows. GNU/Linux and Windows users can choose between 32 and 64
bit versions to match their system.
Source
The source code is available via github: https://github.com/alexrj/Slic3r
(For more details see §3.6)
Manual
The latest version of this document, with L
A
T
E
X source code is presently at:
http://devel.lulzbot.com/Slic3r/
Installing
GNU/Linux
Extract the archive to a folder of your choosing. Either:
• Start Slic3r directly by running the Slic3r executable, found in the
bin directory, or
• Install Slic3r by running the do-install executable, also found in the
bin folder.
The archive file may then be deleted.
Windows
Unzip the downloaded zip file to a folder of your choosing, there is no
installer script. The resulting folder contains two executables:
• slic3r.exe - starts the GUI version.
• slic3r-console.exe - can be used from the command line.
The zip file may then be deleted.
39

LulzBot TAZ Specifications

General

Nozzle Diameter	0.5 mm (standard), interchangeable
Print Speed	Up to 200 mm/s
Max Hotend Temperature	300°C
Max Heated Bed Temperature	120°C
Connectivity	USB
Supported Materials	PLA, ABS, HIPS, PVA, PETG, Nylon, TPE, TPU, PC, wood-filled
Print Surface	PEI-coated borosilicate glass bed
Bed Leveling	Automatic
Operating System Compatibility	Windows, macOS, Linux
Power Requirements	100 - 240 VAC
Print Technology	Fused Deposition Fabrication (FDM)