LulzBot TAZ User Manual

3.3. FIRST SLICE
Figure 3.17: Minimug model.
Figure 3.18: STL file loaded.
The model can be repositioned by dragging the representation of it on
the left of the screen around the bed. Note that the dimensions of the bed
should match your printer, as given during the initial configuration above.
On the right-hand side is the list of currently loaded files. The buttons
along the top of the file list allow you to arrange the models.
• More/Less - Adjust how many copies should be printed.
63

LulzBot TAZ Specifications

General

Nozzle Diameter	0.5 mm (standard), interchangeable
Print Speed	Up to 200 mm/s
Max Hotend Temperature	300°C
Max Heated Bed Temperature	120°C
Connectivity	USB
Supported Materials	PLA, ABS, HIPS, PVA, PETG, Nylon, TPE, TPU, PC, wood-filled
Print Surface	PEI-coated borosilicate glass bed
Bed Leveling	Automatic
Operating System Compatibility	Windows, macOS, Linux
Power Requirements	100 - 240 VAC
Print Technology	Fused Deposition Fabrication (FDM)