LulzBot TAZ User Manual

3.4. EXPERT MODE
Figure 3.37: Minimug model, tilted 45
◦
.
As with infill, there are several patterns available for the support
structure.
Figure 3.38: Support infill pattern: Rectilinear
Figure 3.39: Support infill pattern: Rectilinear Grid
81

LulzBot TAZ Specifications

General

Nozzle Diameter	0.5 mm (standard), interchangeable
Print Speed	Up to 200 mm/s
Max Hotend Temperature	300°C
Max Heated Bed Temperature	120°C
Connectivity	USB
Supported Materials	PLA, ABS, HIPS, PVA, PETG, Nylon, TPE, TPU, PC, wood-filled
Print Surface	PEI-coated borosilicate glass bed
Bed Leveling	Automatic
Operating System Compatibility	Windows, macOS, Linux
Power Requirements	100 - 240 VAC
Print Technology	Fused Deposition Fabrication (FDM)