Lutz BE10 - Page 32

32
0698-651 Operating unit - 04/2021
en
Safety prompt: On/O
Digital input: On/O
Alarm output: On/O
RS 485-Interface: On/O
Analog output On/O
Pulse output On/O
Measurement–Fluidowingthroughismeasured:On/O
Basicowmetertype:ST10, SL10, LM10, UN10, VA10, HDO250P, HDO250,
HDO400, HDO500, Other
Programming lock: On/O
Totalvolumecounter:Totalvolumethathasowedthroughthemeter
(for service purpose only)
Serial number of the operating unit
Current setting 4/5
Current setting 5/5
Safety: On
Dig. inp.: Off
Alarm: Off
RS 485: Off
Pulse outp.: Off
Measurement: Off
Analog: Off
Basic meter:
Other
Prog. lock: Off
Total: 386.64
SN: A7D73113000