Lutz BE10 - Manual Mode; Resetting the Part Volume Meter

24
0698-651 Operating unit - 04/2021
en
9.1 Manual mode
Inmanualmode,youcarryoutllingwithamanualnozzle.Priortothellingprocessyousetthepartial
volume meter to 0 and the desired volume is measured whilst you operate the nozzle.
i
Setting the operating mode (→ chapter 9.5)
Operating mode: Manual mode
9.1.1 Resetting the part volume meter
Filling
Press the "RESET" button to clear the part. volume meter.
Menu
?
RESET
MAN
Menu
?
RESET
MAN
Menu
?
RESET
MAN