Lutz BE10 - Leakage Alarm On;Off; Overrun Correction On;Off

49
0698-651 Operating unit - 04/2021
en
9.16 Leakage alarm On/O
RM
Press "On" to switch the leakage alarm on.
Press "O"toswitchtheleakagealarmo.Thisisthefactorysetting.
Press "OK" to save the selection and return to the menu level.
Press "Cancel" to retain the setting and return to the previous menu level.
9.17 Overrun correction On/O
Press "On" to switch overrun correction on.
Press "O"toswitchoverruncorrectiono.Thisisthefactorysetting.
Press "OK" to save the selection and return to the menu level.
Press "Cancel" to retain the setting and return to the previous menu level.
RM
Menu 3/5
?
?
Fault detection
Valve function
Leakage alarm
Overrun corr.
Ext. actuation
Leakage alarm
?
?
OK
Cancel
On
Off
Menu 3/5
?
?
Fault detection
Valve function
Leakage alarm
Overrun corr.
Ext. actuation
Overrun correction
?
?
OK
Cancel
On
Off
Menu
?
?
AUTO
START
Change
volume
Menu
?
?
AUTO
START
Change
volume