Lutz BE10 - Alarm Output On;Off; RS 485-Interface On;Off

54
0698-651 Operating unit - 04/2021
en
KM
RM
NG
and
or
9.22.2 Alarm output On/O
Press "On" to switch the alarm output on.
Press "O"toswitchthealarmoutputo.Thisisthefactorysetting.
Press "OK" to save the selection and return to the menu level.
Press "Cancel" to retain the setting and return to the previous menu level.
9.22.3 RS 485-Interface On/O
KM
RM
NG
and
or
Press "On" to switch the RS 485 on.
Press "O"toswitchtheRS485o.Thisisthefactorysetting.
Press "OK" to save the selection and return to the menu level.
Press "Cancel" to retain the setting and return to the previous menu level.
Communication 1/2
?
?
Digital input
Alarm output
RS 485
Analog output
OK
Cancel
Alarm output
?
?
OK
Cancel
On
Off
Communication 1/2
?
?
Digital input
Alarm output
RS 485
Analog output
OK
Cancel
RS 485
?
?
OK
Cancel
On
Off