Lutz BE10 - Page 48

48
0698-651 Operating unit - 04/2021
en
Press "Change value"tosettheOpointforthesolenoidvalve.Thesole-
noidvalveisclosedasperthisvaluebeforetheendofthellingprocess.
Press "On" to switch the early closing of the solenoid valve on. This can
osete.g.longvalveclosingtimes.Withasecondvalveonrelayoutput1,
pressure peaks and foam formation can be avoided.
Press "O"toswitchthisfunctiono.
This is the factory setting.
Press "
←← C" to delete the last entry on the display.
Use the buttons "0-9" and "."toenterthevaluefortheOpoint.
Press "Cncl" to cancel the entry and return to the previous screen.
Press "OK"tosavethevaluefortheOpointandnishmakingentries
Off point
?
?
OK
Cancel
Sol. valve
5.23 s
switch off before
filling end.
On
Off
Change value
Off point
?
?
OK
Cncl
←←
C1
2 3
654
7
8 9
0
Valve function
?
?
Cancel
On point
Off point
Off point
?
?
OK
Cancel
Sol. valve
5.23 s
switch off before
filling end.
On
Off
Change value