Lutz BE10 - Page 46

46
0698-651 Operating unit - 04/2021
en
Press "Change value" to set the On point for the solenoid valve. After the
startofthellingprocess,thesolenoidvalveisopenedwiththesetdelay.
Press "On" to switch time-delayed opening of the solenoid valve on. This
allowsthepumptobuildupfulloperatingpressurebeforethellingprocess
starts.
Press "O"toswitchthisfunctiono.
This is the factory setting.
Press "
←← C" to delete the last entry on the display.
Use the buttons "0-9" and "." to enter the value for the On point.
Press "Cncl" to cancel the entry and return to the previous screen.
Press "OK"tosavethevaluefortheOnpointandnishmakingentries.
Valve function
?
?
Cancel
On point
Off point
On point
?
?
OK
Cancel
On
Change value
Off
Solenoid valve
5.23 s
switch on after
pressing "START".
On point
?
?
OK
Cncl
←←
C1
2 3
654
7
8 9
0