Rev #2 Version 3.00 August 2020
Page 49 of 80
The Flarm timeout defines the time when the user ceases to see a FLARM warning after
dismissing the FLARM warning of a FLARM object. Alert on A/C mode enables or disables
whether an alarm is set off by A/C mode transponders whose location is unknown and
whose distance is only approximated.
6.8.6.2 Airspace Warning
The airspace alarm will go off at the desired number of minutes and seconds before
entering airspace. You can also set minimum altitude difference and distance to the
airspace for the alarm to go off. The alarm for each type of zone/airspace can be enabled or
disabled separately.
6.8.6.3 Altitude Warnings
This sets the alarm that goes off before reaching the desired altitude. There is an option to
disable it for the first 3 minutes of the flight (for example during take-off).
To Next Page
Loading...
