Rev #2 Version 3.00 August 2020
Page 55 of 80
6.8.9.6 Wi-Fi
On Wi-Fi page are available following items:
• Setup
• Access points
• IP NMEA
6.8.9.6.1 Setup
In setup the user can enable or disable Wi-Fi module and see the version of the Wi-Fi
firmware, MAC addresses of Access point and Wi-Fi module.
6.8.9.6.2 Access Points
In this menu you can connect to a Wi-Fi access point. All points in range will be shown as
well as all stored points (which may not be in range). For this function to work you first
must enable Wi-Fi under Hardware->Communications.
To Next Page
Loading...
