LXNAV NANO4 - Airspaces; Waypoints

Rev #2 Version 3.00 August 2020
Page 57 of 80
Please refer to Section 4.6 on how to upload files.
6.8.11.1 Airspaces
Once your airspace files (.cub) are loaded on to the Nano
4
select it in Files->Airspaces.
Selected airspaces will now be displayed on the waypoint and task pages.
The Airspace CUB file is limited to a maximum 5 Mbytes size.
6.8.11.2 Waypoints
Once your waypoints files (.cub) are loaded on to the Nano
4
you can go to the Files-
>Waypoints menu and select the waypoints files you wish to make active.