LXNAV NANO4 - Flarmnet; Map

Rev #2 Version 3.00 August 2020
Page 58 of 80
The Waypoint CUP file is limited to a maximum 1 Mbyte size.
6.8.11.3 Map
The NANO
4
can have terrains and maps. To obtain map files (CITv1 or CITv2) please visit:
CITv1: https://gliding.lxnav.com/citv1/
CITv2: https://gliding.lxnav.com/citv2/
Once downloaded:
• Connect your Nano
4
to the computer
• Transfer the downloaded map files (.cit) to your Nano
4
(root folder)
• Go to Setup->Files ->Map and select the map you wish to use.
Maps are supported only in firmware versions 2.0 or higher.
6.8.11.4 FlarmNet
FlarmNet database files (.fln) can be selected here. Go to File>FlarmNet and select the
file you wish to use. This is useful only when a FLARM is connected to the device.