LXNAV S100 - Page 7

Rev #37 Version 8.0 April 2021
Page 7 of 121
9.6.2.3 LXNAV S8xD Wiring 107
9.7 S8x/S10x Configurations 108
9.7.1 Symbols 108
9.7.2 Nano/Nano3 – Sxxx - MiniMap 108
9.7.3 Nano3 - Sxxx - Oudie 108
9.7.4 Colibri II – Sxxx - Oudie 109
9.7.5 Colibri/Volkslogger - Sxxx - Oudie 109
9.7.6 FLARM – Sxxx - FlarmViewX - Oudie 110
9.7.7 FlarmMouse - ADSB – Sxxx - FlarmView - Oudie 110
9.7.8 FlarmMouse – Sxxx - Oudie 111
9.7.9 FlarmMouse – Sxxx – Oudie – Flaps Sensor 111
9.7.10 FlarmMouse - Nano3 - Sxxx - Oudie 112
PowerMouse + (Nano3) - Sxxx - Oudie 112
9.7.11 S8x/S10x– S8xD 113
9.7.12 Sxx Vario Connection to a LXxxxx 114
115
9.8 Data Transfer 116
9.8.1 S8x/S10x 116
9.8.2 Other Data Transfers 116
10 Firmware Update 117
10.1 Updating LXNAV S10x and S8x Firmware Using a Micro SD Card 117
10.2 Updating LXNAV S8x Firmware Using a Micro SD Card (up to fw. 5.43) 117
10.3 Updating LXNAV S8x Firmware Using a Micro SD Card (OLD Method) 117
10.4 Incomplete Update Message (OLD version) 118
11 FAQ 119
12 Revision History 120