Lynx NGT-9000 User Manual

Lynx NGT-9000s
Installation Manual
Table 4-3: List of Fault Log Messages
FAULT ID/ CODE
(HEX)
FAULT DESCRIPTION CORRECTIVE ACTION
0x00000021 Touch INIT Fault
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x00000033 IODC INIT Fault
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x00000034 IODC Read Fault
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x00000035 IODC Overflow Fault
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x00000036 IODC Buffer Overflow Fault
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x00000037 IODC Parity Fault
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x00000047 Fault ID for the watchdog test failure
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x00000048 Fault ID for the memory test failure
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x00000049
Fault ID for the DSP Clock test
failure
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x0000004A Fault ID for the FPGA test failure
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x0000004B
Fault ID for the Power management
test failure
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x0000004C Fault ID for the Primary Image failure
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x0000004D
Fault ID for the Secondary Image
failure
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0x00001001 Oscillator Synthesizer Out of Lock
Possible Cause
ADS-B In Internal Degraded
ADS-B Out Internal Failure
TAS Internal Failure
Transponder Internal Failure
Reboot the unit and check if the fault
persists. Contact L-3 Field Service before
removal.
0040-17001-01 Maintenance Page 4-19
Revision A January 15, 2015

Lynx NGT-9000 Specifications

General

Brand	Lynx
Model	NGT-9000
Category	Security System
Language	English