22
Speed
Your speed over the ground is displayed in the selected unit of
measurement. Dashes are displayed when your position has not been
calculated.
See Navigation Menu to change the units and set the speed filter.
Course
Your course over the ground, relative to the Reference North selected, is
expressed in degrees. It is constantly updated and can only be calculated
when you are moving. Dashes are displayed when you are not moving.
Configurable Window
The information displayed in this window can be modified.
Select the window using the button and push Enter. A list of available
data is displayed. Select the type of data desired, and push Enter. Your
screen is updated.
See Choosing the Information Displayed in the Configurable Window.
Date and Time + Satellite Symbol +
WAAS/EGNOS/MSAS Symbol
The date and local time are always displayed. The satellite symbol means
that your FX324 MAP has calculated your position.
Note: You can view the satellites used to calculate your position at any
time. See Position Menu.
The W symbol is displayed when your GPS is functioning in
WAAS/EGNOS/MSAS mode. The S symbol is displayed when your GPS
is functioning in simulator mode. The D symbol is displayed when your
GPS is functioning in differential mode.
Position Screen No. 2
This screen has four tabs. Ephemeris, Tide, Current and HDR. It can be
displayed at any time by pushing the Pos button once or twice.
Note: This screen is always displayed on the last viewed tab.
Ephemeris Tab
This tab displays the sunrise and sunset, moonrise and moonset times for
a selected date and location.
To Next Page
Loading...
Need help?
General