48
GoTo Screen No. 2
This screen can be displayed at any time by pushing the GoTo button
once or twice. It indicates the distance and the bearing between two
waypoints.
Example: The screen below displays the distance and the bearing between
the waypoint Ryde and the waypoint Bognor Regis.
Note: If the screen that is displayed after pushing the GoTo button is
different, push the GoTo button once again.
îî Waypoint No. 1
Select the upper left window using the button and push Enter to select
the first waypoint.
- Select Position to select your current position.
- Select Waypoint to select a waypoint from the list of all your waypoints.
- Select MapSend BlueNav Port to select a port from the chart that is
currently loaded in your device.
See MapSend BlueNav Charts.
To Next Page
Loading...
