33
Odometers 1 and 2
The Odometer 1 and Odometer 2 windows display the distance traveled
in the selected unit of measurement.
See Navigation Menu to change the unit of measurement.
To reset a counter:
Navigation Æ Counter 1 or Counter 2 Æ Enter
A confirmation message is displayed. Select Yes and push Enter to
confirm that you really want to reset the counter or select No and push
Enter to cancel.
Configurable Window
To modify the information that is displayed in this window:
Navigation Æ Window Æ Enter
The list of available information is displayed. Highlight the desired type of
information and push Enter. Your screen is updated.
See Choosing the Information Displayed in the Configurable Window.
Date and Time + Satellite Symbol +
WAAS/EGNOS/MSAS Symbol
The date and local time are always displayed. The satellite symbol means
that your FX324 MAP has calculated your position.
Note: You can view the satellites used to calculate your position at any
time. See Position Menu.
The W symbol is displayed when your GPS is functioning in
WAAS/EGNOS/MSAS mode. The S symbol is displayed when your GPS
is functioning in simulator mode. The D symbol is displayed when your
GPS is functioning in differential mode.
Navigation Screen No. 2
This screen can be displayed at any time by pushing the Nav button once
or twice.
Example: The screen below displays your maximum speed, a chronometer, a
countdown, your average speed, the elapsed trip time and the
distance traveled.
To Next Page
Loading...
Need help?
General