68
Displaying the Zoom Scale
The Zoom option allows you to choose whether or not the zoom scale is
displayed.
Menu Æ PLOT Tab Æ 3-Zoom
Select Yes (visible) or No (invisible) and push Enter.
Displaying the Direct Line
You can choose whether or not to display the direct line between your
starting position and the active waypoint. This is the direct line to the
waypoint, which is used to calculate the cross track error (XTE). In GoTo
mode, the line displayed corresponds to the active segment (that is, the
segment between the waypoint you have just passed and the one toward
which you are navigating).
The Direct Line option lets you choose whether or not to display the direct
line to your destination waypoint.
Menu Æ PLOT Tab Æ 4-Direct Line
Select Yes (visible) or No (invisible) and push Enter.
Displaying the Vessel Line
You can choose whether or not to display the line between your current
position and the active waypoint.
Menu Æ PLOT Tab Æ 5-MobileÆWpt
Select Yes (visible) or No (invisible) and push Enter.
Displaying the Waypoints
You can choose to display only the active waypoint or all of the waypoints.
Menu Æ PLOT Tab Æ 6-Waypoint Display
Select Active Waypoint or All Waypoints and push Enter.
Displaying Waypoint Names
You can select one of the options for the waypoints name display.
Menu Æ PLOT Tab Æ 7-Wpt Name Display
Select one of the following options and push Enter.
- No: Only the waypoint icons are displayed.
- First Letter: The first letter of the name of each waypoint is displayed.
- Full: The full name of each waypoint is displayed.
To Next Page
Loading...
Need help?
General