61
To make the T2 track visible on the Plotter screen, select ¾ with and
push Enter.
Activating the Home Function
The Home Function option allows you to return to your starting point by
following the exact same track, that is, the same route, as you used on
your way to your destination.
Menu Æ RTE/TRK Tab Æ 6–Home Function
Select Yes (active) or No (inactive) and push Enter.
Select Yes to automatically create and activate a route enabling you to go
back to your starting point following the same itinerary.
Choosing the Track Interval
Option 7 - Track Interval lets you choose the interval at which points in the
active track are saved.
Menu Æ RTE/TRK Tab Æ 7-Track Interval
The list that appears offers several different save intervals, defined by
time (from 1 to 60 seconds) or by distance (0.01 to 1 units of
measurement). Select the desired save interval or select Off and push
Enter.
To Next Page
Loading...
Need help?
General