81
Select the Sentence 1 window and push Enter.
Select PML2 from the scrolling list (bottom of the list) and push Enter.
Configuring the Serial Input Port
To receive the differential corrections, the Serial Input Port must be set on
RTCM104.
Menu Æ SETUP Tab Æ 4-Serial Input Æ RTCM104 Æ Enter
Configuring the DF300 from your FX324 MAP
In order to configure the DF300 from your FX324 MAP, the serial output
port must be in NMEA 183 1.5 or NMEA 183 2.0 or NMEA 183 2.3 format
and the PML3 and MSK sentences must be selected for this format.
Menu Æ SETUP Tab Æ 3–Serial Output
Select NMEA 183 1.5 or NMEA 183 2.0 or NMEA 183 2.3 from the list
and push Enter.
Select the Sentence 2 window and push Enter. Select PML3 from the
scrolling list and push Enter.
Select the Sentence 3 window and push Enter. Select MSK from the
scrolling list and push Enter.
To display the DGPS information screen:
Menu Æ ADVAN. Tab Æ 1-DGPS
To Next Page
Loading...
