41
Activating the GoTo Waypoint or Route Function
To activate the GoTo function:
GoTo Æ » icon Æ Enter
Select an option from the list and enter your choice by pushing Enter.
The
Á icon automatically replaces the » icon as soon as the GoTo mode
is activated.
Note: For first time use, the GoTo function will work only after the unit
calculated a position fix.
Waypoint
Select this action and push Enter to display the list of all your waypoints.
Choose a waypoint using the
button and push Enter to make it your
destination waypoint. The name of the selected waypoint is displayed at
the bottom of the screen.
Advice: To quickly access a desired waypoint, enter the first letter(s) of its
name in the active field. The list is updated with all the waypoint
names that begin with that or these letter(s).
Nearest Waypoint
Select this action and push Enter to display the list of 8 waypoints that are
closest to your current position. These 8 waypoints are displayed in
distance from your current position order.
Choose a waypoint using the
button and push Enter to make it your
destination waypoint. The name of the selected waypoint is displayed at
the bottom of the screen.
Create a Waypoint
Select this action and push Enter to create a new waypoint
See Waypoint Menu.
Route
Select this action and push Enter to display the list of all your routes.
To Next Page
Loading...
Need help?
General