46
displayed because the distance remaining is less than 1 kilometer. The
destination waypoint icon moves toward the bottom of the screen as you
approach it.
Use the Z+ and Z- buttons to change the zoom scale. There are five
possible scales:
- 0.25: The length of the road represents a maximum of 0.25 kilometer.
The destination waypoint icon is displayed at the end of the road if
the distance remaining is less than 0.25 kilometer.
- 0.5: The length of the road represents a maximum of 0.5 kilometer.
The destination waypoint icon is displayed at the end of the road if
the distance remaining is less than 0.5 kilometer.
- 1: The length of the road represents a maximum of 1 kilometer. The
destination waypoint icon is displayed at the end of the road if the
distance remaining is less than 1 kilometer.
- 2: The length of the road represents a maximum of 2 kilometers. The
destination waypoint icon is displayed at the end of the road if the
distance remaining is less than 2 kilometers.
- 4: The length of the road represents a maximum of 4 kilometers. The
destination waypoint icon is displayed at the end of the road if the
distance remaining is less than 4 kilometers.
Note: You must always check to make sure there are no obstacles in the
direct line between your point of departure and your destination
waypoint.
When the deviation between your course and the bearing to follow is very
big, an arrow appears, indicating the direction in which you should travel.
Radar Mode
Select the
È icon with the button and push Enter until the Radar mode
is displayed on the screen.
The line and the profile at the center of the screen represent your course.
The arrow that points toward the destination waypoint icon indicates the
To Next Page
Loading...
Need help?
General