Manitowoc Grove GRT9165 User Manual

MAINTENANCE AND LUBRICATION GRT9165 OPERATOR MANUAL
6-28 Published 7-23-2020, Control # 668-02
Item
Lube Point
Description
Figure No.
Approved
Lubricant
Approximate
Capacity
Service Interval
Service
Application
Superstructure Lubrication
23
Swing Drive
Gearbox
See NOTE 29.
See NOTE 30.
Figure 6-13 B
4 L (4.23 qt)
each gearbox
Every 50 hours of
service
CHECK oil level
FILL swing drive
gearbox to LEVEL
on DIPSTICK (23a)
2 service points
See NOTE 26.
Every 1000 hours, or
12 months of service,
whichever interval
comes first
DRAIN swing drive
gearbox at (23b)
FILL swing drive
gearbox to LEVEL
on DIPSTICK (23a)
2 service points
See NOTE 26.
24
Swing Drive
Gearbox –
Brake Assembly
See NOTE 29.
See NOTE 30.
Figure 6-13 H
0.3 L (0.63 pt)
each gearbox
After first 50 hours of
service
REMOVE Breather
at (24) and DRAIN
swing drive brake
assembly
FILL swing drive
brake assembly at
(24) to top of elbow
See NOTE 27.
Then, every 50 hours
of service, thereafter
CHECK oil level
FILL swing drive
brake assembly at
(24) to top of elbow
See NOTE 27.
Every 1000 hours, or
6 months of service,
whichever interval
comes first
REMOVE Breather
at (24) and DRAIN
swing drive brake
assembly
FILL swing drive
brake assembly at
(24) to top of elbow
See NOTE 27.
25
Swing Drive
Gearbox –
Drive Pinion
See NOTE 29.
See NOTE 30.
Figure 6-13 G SPRAY ON
Every 500 hours, or
6 months of service,
whichever interval
comes first
SPRAY ON
swing drive pinions
COAT ALL TEETH
26
Boom Pivot Pins
See NOTE 29.
See NOTE 30.
Figure 6-13 L
Until grease
extrudes
Every 300 hours, or
3 months of service,
whichever interval
comes first
LUBRICATE
2 grease fittings
See NOTE 28.

Manitowoc Grove GRT9165 Specifications

General

Brand	Manitowoc
Model	Grove GRT9165
Category	Construction Equipment
Language	English